View source with raw comments or as raw
    1/*  Part of SWI-Prolog
    2
    3    Author:        Jan Wielemaker
    4    E-mail:        jan@swi-prolog.org
    5    WWW:           https://www.swi-prolog.org
    6    Copyright (c)  2006-2024, University of Amsterdam
    7                              VU University Amsterdam
    8                              SWI-Prolog Solutions b.v.
    9    All rights reserved.
   10
   11    Redistribution and use in source and binary forms, with or without
   12    modification, are permitted provided that the following conditions
   13    are met:
   14
   15    1. Redistributions of source code must retain the above copyright
   16       notice, this list of conditions and the following disclaimer.
   17
   18    2. Redistributions in binary form must reproduce the above copyright
   19       notice, this list of conditions and the following disclaimer in
   20       the documentation and/or other materials provided with the
   21       distribution.
   22
   23    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
   24    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
   25    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
   26    FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
   27    COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
   28    INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
   29    BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
   30    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
   31    CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
   32    LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
   33    ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
   34    POSSIBILITY OF SUCH DAMAGE.
   35*/
   36
   37:- module(prolog_coverage,
   38          [ coverage/1,                 % :Goal
   39            coverage/2,                 % :Goal, +Options
   40            show_coverage/1,            % :Options
   41            show_coverage/2,            % :Goal, +Options (deprecated)
   42            cov_save_data/2,            % +File, +Options
   43            cov_load_data/2,            % +File, +Options
   44            cov_reset/0,                %
   45            cov_property/1              % ?Property
   46          ]).   47:- autoload(library(apply),
   48            [exclude/3, maplist/2, convlist/3, maplist/3, maplist/4]).   49:- autoload(library(ordsets), [ord_intersection/3, ord_subtract/3, ord_union/3]).   50:- autoload(library(pairs),
   51            [ group_pairs_by_key/2,
   52              pairs_keys_values/3,
   53              pairs_values/2,
   54              map_list_to_pairs/3
   55            ]).   56:- autoload(library(ansi_term), [ansi_format/3]).   57:- autoload(library(filesex), [directory_file_path/3, make_directory_path/1]).   58:- autoload(library(lists),
   59            [append/3, flatten/2, max_list/2, member/2, append/2, sum_list/2]).   60:- autoload(library(option), [option/2, option/3]).   61:- autoload(library(readutil), [read_line_to_string/2]).   62:- use_module(library(prolog_breakpoints), []).   63:- autoload(library(prolog_clause), [clause_info/4]).   64:- autoload(library(solution_sequences), [call_nth/2, distinct/2]).   65:- use_module(library(debug), [debug/3, assertion/1]).   66:- autoload(library(error), [must_be/2]).   67:- autoload(library(prolog_code), [pi_head/2]).   68:- autoload(library(terms), [mapsubterms/3]).   69
   70:- set_prolog_flag(generate_debug_info, false).

Coverage analysis tool

The purpose of this module is to find which part of the program has been used by a certain goal. Usage is defined in terms of clauses for which the head unification succeeded. For each clause we count how often it succeeded and how often it failed. In addition we track all call sites, creating goal-by-goal annotated clauses.

The result is represented as a list of clause-references. As the references to clauses of dynamic predicates cannot be guaranteed, these are omitted from the result.

Using coverage/2 with the option annotate(true), implied by ext(Ext) or dir(Dir), the analysis creates a line-by-line copy of the source files that is annotated with how many times this line was executed and with what logical results. These annotations rely on relating executable code to source locations which is shared by the source level debugger. Source level rewrites due to term or goal expansion may harm the results.

The typical usage is to load the program and run the query below to get a report by file with percentages and a directory cov holding annotated files that provide line-by-line annotations. See show_coverage/1 for details.

?- coverage(Goal, [dir(cov)]).

Coverage collection and threads

The coverage collect data structure is shared by threads created from the thread that is collecting coverage data. Currently, this thread should be joined before we can operate on the coverage data.

Combining coverage data from multiple runs

The coverage tools allow both combining data from running multiple queries as combining data from multiple Prolog processes.

For multiple queries in the same process, coverage data may be collected using coverage/1 which, unlike coverage/2, does not change the non-deterministic semantics of the Goal and adds to the already collected data. If no current collection is in progress, the currently collected data can be displayed using show_coverage/1.

Coverage data may be saved to a file using cov_save_data/2. Saved data can be reloaded using cov_load_data/2. Data from multiple Prolog runs can be combined in the same file using cov_save_data/2 with the append(true) option. When possible, file locking is used to ensure that concurrect processes can safely use the same data file. The result can be shown by loading the code that was relevant to all runs, use cov_load_data/2 and show the result using show_coverage/1.

Note that saving an loading the coverage data saves and restores references to the clauses as the Nth clause of a predicate defined in a specific file. This implies that the program must be loaded in exactly the same way, including optimization level, term/goal expansion and order of multifile predicates.

Predicate reference

*/

  132:- meta_predicate
  133    coverage(0),
  134    coverage(0,+),                      % :Goal, +Options
  135    show_coverage(:),                   % +Options
  136    show_coverage(0,+).                 % :Goal, +Options (deprecated)
  137
  138:- predicate_options(show_coverage/1, 1,
  139                     [ all(boolean),
  140                       modules(list(atom)),
  141                       roots(list),
  142                       annotate(boolean),
  143                       ext(atom),
  144                       dir(atom),
  145                       line_numbers(boolean),
  146                       color(boolean)
  147                     ]).  148:- predicate_options(coverage/2, 2,
  149                     [ show(boolean),
  150                       pass_to(prolog_coverage:show_coverage/1,1)
  151                     ]).  152:- predicate_options(cov_save_data/2, 2,
  153                     [ append(boolean)
  154                     ]).  155:- predicate_options(cov_load_data/2, 2,
  156                     [ load(boolean),
  157                       silent(boolean)
  158                     ]).
 coverage(:Goal)
As call(Goal), collecting coverage information while Goal is running. If Goal succeeds with a choice point, coverage collection is suspended and resumed if we backtrack into Goal. Calls to coverage/1 may be nested.
  168coverage(Goal) :-
  169    setup_call_cleanup(
  170        '$cov_start'(Level),
  171        cov_run(Goal, Level),
  172        '$cov_stop'(Level)).
  173
  174cov_run(Goal, Level) :-
  175    call(Goal),
  176    deterministic(Det),
  177    (   Det == true
  178    ->  true
  179    ;   (   '$cov_stop'(Level)
  180        ;   '$cov_start'(Level),
  181            fail
  182        )
  183    ).
 coverage(:Goal, +Options) is semidet
Collect and optionally report coverage by Goal. Goal is executed as in once/1. Options processed:
show(+Boolean)
When true (default), call show_coverage/1 passing Options to show the collected coverage data and reset the data. When false, collect the data but do not reset it. If there is already existing data the new data is added.
  196coverage(Goal, Options) :-
  197    clean_output(Options),
  198    setup_call_cleanup(
  199        '$cov_start'(Level),
  200        once(Goal),
  201        cov_finish(Level, Options)).
  202
  203show_coverage(Goal, Options) :-
  204    print_message(warning, coverage(deprecated(show_coverage/2))),
  205    coverage(Goal, Options).
  206
  207cov_finish(Level, Options) :-
  208    option(show(true), Options, true),
  209    !,
  210    '$cov_stop'(Level),
  211    (   Level == 1
  212    ->  show_coverage(Options),
  213        cov_reset
  214    ;   true
  215    ).
  216cov_finish(Level, _) :-
  217    '$cov_stop'(Level).
 show_coverage(+Options) is det
Show collected coverage data. By default it reports the percentage of called and failed clauses related to covered files. Using dir(Dir), detailed line-by-line annotated files are created in the directory Dir. Other options control the level of detail.
all(+Boolean)
When true, report on any file in which some predicate was called.
modules(+Modules)
Only report on files that implement one of the given Modules.
roots(+Directories)
Only report on files below one of the given roots. Each directory in Directories can be a specification for absolute_file_name/3.
annotate(+Bool)
Create an annotated file for the detailed results. This is implied if the ext or dir option are specified.
ext(+Ext)
Extension to use for the annotated file. Default is `.cov`.
dir(+Dir)
Dump the annotations in the given directory. If not given, the annotated files are created in the same directory as the source file. Each clause that is related to a physical line in the file is annotated with one of:
###Clause was never executed.
++NClause was entered N times and always succeeded
--NClause was entered N times and never succeeded
+N-MClause has succeeded N times and failed M times
+N*MClause was entered N times and succeeded M times

All call sites are annotated using the same conventions, except that --- is used to annotate subgoals that were never called.

line_numbers(Boolean)
If true (default), add line numbers to the annotated file.
color(Boolean)
Controls using ANSI escape sequences to color the output in the annotated source. Default is true.
width(+Columns)
Presumed width of the output window. A value of 40 is considered the minimum. Smaller values are handled as 40.

For example, run a goal and create annotated files in a directory cov using:

?- show_coverage([dir(cov)]).
bug
- Color annotations are created using ANSI escape sequences. On most systems these are displayed if the file is printed on the terminal. On most systems less may be used with the -r flag. Alternatively, programs such as ansi2html (Linux) may be used to convert the files to HTML. It would probably be better to integrate the output generation with library(pldoc/doc_htmlsrc).
  280show_coverage(_:Options), is_list(Options) =>
  281    covered(Succeeded, Failed),
  282    (   report_hook(Succeeded, Failed)
  283    ->  true
  284    ;   file_coverage(Succeeded, Failed, Options)
  285    ).
  286show_coverage(_:Goal), Goal=_:Call, callable(Call) =>
  287    print_message(warning, cov_deprecated(show_coverage)),
  288    coverage(Goal, []).
  289show_coverage(_:Options) =>
  290    must_be(list, Options).
 covered(-Succeeded, -Failed) is det
Collect failed and succeeded clauses.
  296covered(Succeeded, Failed) :-
  297    findall(Cl, ('$cov_data'(clause(Cl), Enter, 0), Enter > 0), Failed0),
  298    findall(Cl, ('$cov_data'(clause(Cl), _, Exit), Exit > 0), Succeeded0),
  299    sort(Failed0, Failed),
  300    sort(Succeeded0, Succeeded).
  301
  302
  303                 /*******************************
  304                 *           REPORTING          *
  305                 *******************************/
 file_coverage(+Succeeded, +Failed, +Options) is det
Write a report on the clauses covered organised by file to current output. Show detailed information about the non-coverered clauses defined in the modules Modules.
  313file_coverage(Succeeded, Failed, Options) :-
  314    abolish_module_tables(prolog_coverage),
  315    findall(File-PrintFile,
  316            report_file(File, PrintFile, Succeeded, Failed, Options),
  317            Pairs),
  318    Pairs \== [],
  319    !,
  320
  321    (   option(width(W0), Options)
  322    ->  W is max(40, W0)
  323    ;   pairs_values(Pairs, PrintFiles),
  324        maplist(atom_length, PrintFiles, Lengths),
  325        max_list(Lengths, Longest),
  326        IdealWidth is Longest+21,
  327
  328        tty_width(Width, Options),
  329        W is min(IdealWidth, Width - 2)
  330    ),
  331    CovCol is W - 6,
  332    ClausesCol is CovCol - 6,
  333
  334    header('Coverage by File', W),
  335    ansi_format(bold, '~w~t~w~*|~t~w~*|~t~w~*|~n',
  336                ['File', 'Clauses', ClausesCol, '%Cov', CovCol, '%Fail', W]),
  337    hr(W),
  338    forall(member(File-_, Pairs),
  339           file_summary(File, Succeeded, Failed,
  340                        W, CovCol, ClausesCol,
  341                        Options)),
  342    hr(W),
  343
  344    (   annotate_files(Options)
  345    ->  forall(member(File-_, Pairs),
  346               file_details(File, Succeeded, Failed, Options)),
  347        progress_done('done', [])
  348    ;   true
  349    ).
  350file_coverage(_Succeeded, _Failed, _Options) :-
  351    print_message(warning, coverage(no_files_to_report)).
 report_file(?File, -PrintFile, -Succeeded, -Failed, +Options) is semidet
  355report_file(File, PrintFile, Succeeded, Failed, Options) :-
  356    (   nonvar(File)
  357    ->  true
  358    ;   (   source_file(File)
  359        ;   distinct(File, source_includes(_, File))
  360        )
  361    ),
  362    cov_report_file(File, PrintFile, Options),
  363    cov_clause_sets(File, Succeeded, Failed, Sets),
  364    \+ ( Sets.failed == [],
  365         Sets.succeeded == []
  366       ).
 source_includes(?Main, ?Included) is nondet
True when Included is (recursively) included in the "true" source fine Main.
  373:- table source_includes/2.  374
  375source_includes(Main, Included) :-
  376    nonvar(Main),
  377    !,
  378    source_file_property(Main, includes(File, _Time)),
  379    (   Included = File
  380    ;   source_includes(File, Included)
  381    ).
  382source_includes(Main, Included) :-
  383    nonvar(Included),
  384    !,
  385    source_file_property(Included, included_in(Parent, _Time)),
  386    (   no_included_file(Parent)
  387    ->  Main = Parent
  388    ;   source_includes(Main, Parent)
  389    ).
  390source_includes(Main, Included) :-
  391    source_file(Main),			% generator
  392    source_includes(Main, Included).
  393
  394main_source(File, Main) :-
  395    no_included_file(File),
  396    !,
  397    Main = File.
  398main_source(File, Main) :-
  399    source_includes(Main, File).
 file_summary(+File, +Succeeded, +Failed, +Width, +CovCol, +ClausesCol, +Options) is det
Write a summary with the file and clause percentages on a single line.
  407file_summary(File, Succeeded, Failed, W, CovCol, ClausesCol, Options) :-
  408    cov_report_file(File, PrintFile, Options),
  409    cov_clause_sets(File, Succeeded, Failed, Sets0),
  410    \+ ( Sets0.failed == [],
  411         Sets0.succeeded == []
  412       ),
  413    !,
  414    deduplicate_clauses(File, Sets0, Sets),
  415
  416    length(Sets.clauses, AC),
  417    length(Sets.uncovered, UC),
  418    length(Sets.failed, FC),
  419
  420    CP is 100-100*UC/AC,
  421    FCP is 100*FC/AC,
  422    summary(PrintFile, ClausesCol-8, SFile),
  423    format('~w ~`.t ~D~*| ~t~1f~*| ~t~1f~*|~n',
  424           [SFile, AC, ClausesCol, CP, CovCol, FCP, W]).
  425file_summary(_,_,_,_,_,_,_).
  426
  427file_details(File, Succeeded, Failed, Options) :-
  428    cov_report_file(File, _PrintFile, Options),
  429    cov_clause_sets(File, Succeeded, Failed, Sets0),
  430    \+ ( Sets0.failed == [],
  431         Sets0.succeeded == []
  432       ),
  433    !,
  434    deduplicate_clauses(File, Sets0, Sets),
  435    ord_union(Sets.failed, Sets.succeeded, Covered),
  436    detailed_report(Sets.uncovered, Covered, File, Options).
  437file_details(_,_,_,_).
 cov_clause_sets(+File, +Succeeded, +Failed, -Sets) is det
  441cov_clause_sets(File, Succeeded, Failed,
  442                #{ clauses: All_wo_system,
  443                   succeeded: Succeeded_wo_system,
  444                   failed: Failed_wo_system,
  445                   uncovered: Uncovered_wo_system
  446                 }) :-
  447    file_clauses(File, FileClauses),
  448    ord_intersection(FileClauses, Failed, FailedInFile),
  449    ord_intersection(FileClauses, Succeeded, SucceededInFile),
  450    ord_subtract(FileClauses, SucceededInFile, UnCov1),
  451    ord_subtract(UnCov1, FailedInFile, Uncovered),
  452
  453    clean_set(FileClauses, All_wo_system),
  454    clean_set(SucceededInFile, Succeeded_wo_system),
  455    clean_set(FailedInFile, Failed_wo_system),
  456    clean_set(Uncovered, Uncovered_wo_system).
  457
  458clean_set(Clauses, UserClauses) :-
  459    exclude(is_pldoc, Clauses, Clauses_wo_pldoc),
  460    exclude(is_system_clause, Clauses_wo_pldoc, UserClauses).
  461
  462is_system_clause(Clause) :-
  463    clause_pi(Clause, Name),
  464    Name = system:_.
  465
  466is_pldoc(Clause) :-
  467    clause_pi(Clause, _Module:Name2/_Arity),
  468    pldoc_predicate(Name2).
  469
  470pldoc_predicate('$pldoc').
  471pldoc_predicate('$mode').
  472pldoc_predicate('$pred_option').
  473pldoc_predicate('$exported_op').        % not really PlDoc ...
  474
  475summary(String, MaxLen, Summary) :-
  476    string_length(String, Len),
  477    (   Len < MaxLen
  478    ->  Summary = String
  479    ;   SLen is MaxLen - 5,
  480        sub_string(String, _, SLen, 0, End),
  481        string_concat('...', End, Summary)
  482    ).
 file_clauses(+File, -Set) is det
Set are all clauses in File as an ordered set.
  488file_clauses(File, Set) :-
  489    findall(Cl, clause_source(Cl, File, _), Clauses),
  490    sort(Clauses, Set).
 clause_source(+Clause, -File, -Line) is semidet
clause_source(-Clause, +File, -Line) is semidet
  495clause_source(Clause, File, Line) :-
  496    nonvar(Clause),
  497    !,
  498    clause_property(Clause, file(File)),
  499    clause_property(Clause, line_count(Line)).
  500clause_source(Clause, File, Line) :-
  501    clause_in_file(File, File, Clause, Line).
  502clause_source(Clause, File, Line) :-
  503    source_includes(Main, File),
  504    clause_in_file(Main, File, Clause, Line).
  505
  506clause_in_file(Main, Source, Clause, Line) :-
  507    Pred = _:_,
  508    source_file(Pred, Main),
  509    \+ predicate_property(Pred, multifile),
  510    nth_clause(Pred, _Index, Clause),
  511    clause_property(Clause, file(Source)),
  512    clause_property(Clause, line_count(Line)).
  513clause_in_file(_Main, Source, Clause, Line) :-
  514    Pred = _:_,
  515    predicate_property(Pred, multifile),
  516    nth_clause(Pred, _Index, Clause),
  517    clause_property(Clause, file(Source)),
  518    clause_property(Clause, line_count(Line)).
 deduplicate_clauses(+File, +ClauseSetsIn, -ClauseSetsOut) is det
Arguments:
ClauseSetsIn- is a dict with clauses, uncovered, failed and succeeded.
  525deduplicate_clauses(File, Set, Set) :-
  526    no_included_file(File),
  527    !.
  528deduplicate_clauses(_File, SetIn, SetOut) :-
  529    _{clauses:AC, uncovered:UC, failed:FC, succeeded:FS} :< SetIn,
  530    clause_duplicates(AC, AC1),
  531    clause_duplicates(UC, UC1),
  532    clause_duplicates(FC, FC1),
  533    clause_duplicates(FS, FS1),
  534    exclude(covered_in_some_file(AC1, FC, FS), UC1, UC2),
  535    exclude(succeeded_in_some_file(AC1, FS), FC1, FC2),
  536    SetOut = SetIn.put(_{clauses:AC1, uncovered:UC2, failed:FC2, succeeded:FS1}).
  537
  538no_included_file(File) :-
  539    source_file(File).
 clause_duplicates(+Clauses, -Sets) is det
Assuming Clauses is a list of clauses associated with a file that was included multiple times, get the equivalent clauses as sets. Note that we know all Clauses come from the same file.
Arguments:
Sets- is an ordered set of ordered sets of clause references that form an equivalence group.
  550clause_duplicates(Clauses, Sets) :-
  551    maplist(clause_dedup_data, Clauses, Dedups),
  552    sort(2, @=<, Dedups, ByMain),       % first my line
  553    sort(1, @=<, ByMain, ByLine),       % then by main
  554    clause_sets(ByLine, Sets0),
  555    sort(Sets0, Sets).
  556
  557clause_dedup_data(Clause, dd(Line, Main, Clause)) :-
  558    clause_property(Clause, line_count(Line)),
  559    clause_property(Clause, source(Main)).
  560
  561clause_sets([], []).
  562clause_sets([H|T0], Sets) :-
  563    same_line_clauses(H, SameL, T0, T1),
  564    same_line_clause_sets([H|SameL], Sets, More),
  565    clause_sets(T1, More).
  566
  567same_line_clauses(CRef, [H|TS], [H|T0], T) :-
  568    arg(1, CRef, Line),
  569    arg(1, H, Line),
  570    !,
  571    same_line_clauses(CRef, TS, T0, T).
  572same_line_clauses(_, [], L, L).
 same_line_clause_sets(+DDClauses, -Sets, ?Tail) is det
Given that DDClauses is a list of dd(Line, File, Clause) each with the same Line and ordered on File, compute the sets of equivalent clauses.

First we deal with the common case where there is at most one clause per file. Then we consider them all the same.

  583same_line_clause_sets([], Sets, Sets) :-
  584    !.
  585same_line_clause_sets(SameL, Sets, More) :-
  586    map_list_to_pairs(arg(2), SameL, Pairs),
  587    group_pairs_by_key(Pairs, ByFile),
  588    pairs_values(ByFile, FileSets),
  589    \+ member([_,_|_], FileSets),
  590    !,
  591    maplist(arg(3), SameL, Clauses0),
  592    sort(Clauses0, Clauses),
  593    Sets = [Clauses|More].
  594same_line_clause_sets([H|T0], [Clauses|Sets], More) :-
  595    same_clauses(H, Same, T0, T),
  596    maplist(arg(3), [H|Same], Clauses0),
  597    sort(Clauses0, Clauses),
  598    same_line_clause_sets(T, Sets, More).
  599
  600same_clauses(CRef, [Same|TS], L0, L) :-
  601    select(Same, L0, L1),
  602    same_clause(CRef, Same),
  603    !,
  604    same_clauses(CRef, TS, L1, L).
  605same_clauses(_, [], L, L).
  606
  607same_clause(dd(L1, F1, C1), dd(L2, F2, C2)) :-
  608    assertion(L1 == L2),
  609    F1 \== F2,
  610    clause_property(C1, size(Size)),
  611    clause_property(C2, size(Size)),
  612    clause(Head0, Body1, C1),
  613    clause(Head1, Body2, C2),
  614    mapsubterms(unqualify, (Head0:-Body1), Clause1),
  615    mapsubterms(unqualify, (Head1:-Body2), Clause2),
  616    Clause1 =@= Clause2.
  617
  618unqualify(_:X, X).
  619
  620covered_in_some_file(AllEQ, Failed, Succeeded, UncoveredSet) :-
  621    member(Clause, UncoveredSet),
  622    member(EQSet, AllEQ),
  623    memberchk(Clause, EQSet),
  624    !,
  625    member(Cl2, EQSet),
  626    (   memberchk(Cl2, Succeeded)
  627    ;   memberchk(Cl2, Failed)
  628    ),
  629    !.
  630covered_in_some_file(_AllEQ, _Failed, _Succeeded, _UncoveredSet) :-
  631    assertion(fail).
  632
  633succeeded_in_some_file(AllEQ, Succeeded, FailedSet) :-
  634    member(Clause, FailedSet),
  635    member(EQSet, AllEQ),
  636    memberchk(Clause, EQSet),
  637    !,
  638    member(Cl2, EQSet),
  639    memberchk(Cl2, Succeeded),
  640    !.
  641succeeded_in_some_file(_AllEQ, _Succeeded, _FailedSet) :-
  642    assertion(fail).
 cov_report_file(+File, -PrintFile, +Options) is semidet
Whether or not to report on File. Scenarios:
all(true)
Report on every file.
modules(List)
Report of the file implements one of the modules in List.
roots(+Dirs)
Report if the file appears below one of Dirs.
default
Report if the file implements a user or test module.
  657cov_report_file(File, _, _) :-
  658    source_file(cov_report_file(_,_,_), File),
  659    !,
  660    fail.                               % do not report on myself
  661cov_report_file(File, File, Options) :-
  662    option(all(true), Options),
  663    !.
  664cov_report_file(File, File, Options) :-
  665    option(modules(Modules), Options),
  666    file_module(File, M),
  667    memberchk(M, Modules),
  668    !.
  669cov_report_file(File, PrintFile, Options) :-
  670    option(roots(Roots), Options),
  671    !,
  672    must_be(list, Roots),
  673    member(Root, Roots),
  674    absolute_file_name(Root, Path,
  675                       [ file_type(directory),
  676                         solutions(all),
  677                         file_errors(fail)
  678                       ]),
  679    ensure_slash(Path, Path1),
  680    atom_concat(Path1, PrintFile, File),
  681    !.
  682cov_report_file(File, File, _Options) :-
  683    (   file_module(File, M),
  684        module_property(M, class(user))
  685    ->  true
  686    ;   forall(source_file_property(File, module(M)),
  687               module_property(M, class(test)))
  688    ).
  689
  690file_module(File, Module) :-
  691    source_file_property(File, module(Module)).
  692file_module(File, Module) :-
  693    source_includes(Main, File),
  694    file_module(Main, Module).
  695
  696ensure_slash(Path, Path) :-
  697    sub_atom(Path, _, _, 0, /),
  698    !.
  699ensure_slash(Path, Path1) :-
  700    atom_concat(Path, /, Path1).
 annotate_files(+Options) is semidet
  704annotate_files(Options) :-
  705    (   option(annotate(true), Options)
  706    ;   option(dir(_), Options)
  707    ;   option(ext(_), Options)
  708    ),
  709    !.
 detailed_report(+Uncovered, +Covered, +File:atom, +Options) is det
Generate a detailed report for File. Depending on Options, this either creates an annotated version of File or it generates a per clause report of non-covered clauses.
Arguments:
Uncovered- is a list of uncovered clauses. If File is an included file, it is a list of sets of clause references that represent the same clause.
Covered- is a list of covered clauses. As with Uncovered, this is a list of sets for an included File
  723detailed_report(Uncovered, Covered, File, Options):-
  724    annotate_files(Options),
  725    !,
  726    convlist(line_annotation(File, uncovered), Uncovered, Annot1),
  727    convlist(line_annotation(File, covered),   Covered,   Annot20),
  728    flatten(Annot20, Annot2),
  729    append(Annot1, Annot2, AnnotationsLen),
  730    pairs_keys_values(AnnotationsLen, Annotations, Lens),
  731    max_list(Lens, MaxLen),
  732    Margin is MaxLen+1,
  733    annotate_file(File, Annotations, [margin(Margin)|Options]).
  734detailed_report(Uncovered, _, File, _Options):-
  735    convlist(uncovered_clause_line(File), Uncovered, Pairs),
  736    sort(Pairs, Pairs_sorted),
  737    group_pairs_by_key(Pairs_sorted, Compact_pairs),
  738    nl,
  739    file_base_name(File, Base),
  740    format('~2|Clauses not covered from file ~p~n', [Base]),
  741    format('~4|Predicate ~59|Clauses at lines ~n', []),
  742    maplist(print_clause_line, Compact_pairs),
  743    nl.
  744
  745line_annotation(File, uncovered, Clause, Annotation) :-
  746    !,
  747    clause_or_set_source_location(Clause, File, Line),
  748    Annotation = (Line-ansi(error,###))-3.
  749line_annotation(File, covered, ClauseOrSet, [HeadAllot|CallSites]) :-
  750    clause_or_set_source_location(ClauseOrSet, File, Line),
  751    clause_or_set_cov_data(ClauseOrSet, Entered, Exited),
  752    line_annotation_msg(line_anot(Line, 0, Entered, Exited), HeadAllot),
  753    flatten([ClauseOrSet], Clauses),
  754    maplist(clause_call_site_annotations, Clauses, AnnotSets),
  755    append(AnnotSets, Annots),
  756    join_annots(Annots, Joined),
  757    maplist(line_annotation_msg, Joined, CallSites),
  758    check_correct_offsets(Clauses, AnnotSets).
  759
  760clause_or_set_source_location([Clause|_], File, Line) =>
  761    clause_property(Clause, file(File)),
  762    clause_property(Clause, line_count(Line)).
  763clause_or_set_source_location(Clause, File, Line) =>
  764    clause_property(Clause, file(File)),
  765    clause_property(Clause, line_count(Line)).
  766
  767clause_or_set_cov_data(Clause, Entered, Exited),
  768    blob(Clause, clause) =>
  769    '$cov_data'(clause(Clause), Entered, Exited).
  770clause_or_set_cov_data(Clauses, Entered, Exited) =>
  771    maplist(clause_or_set_cov_data, Clauses, LEntered, LExited),
  772    sum_list(LEntered, Entered),
  773    sum_list(LExited, Exited).
  774
  775line_annotation_msg(line_anot(Line, _PC, Entered, Exited), (Line-Annot)-Len) :-
  776    (   Exited == Entered
  777    ->  format(string(Text), '++~D', [Entered]),
  778        Annot = ansi(comment, Text)
  779    ;   Exited == 0
  780    ->  format(string(Text), '--~D', [Entered]),
  781        Annot = ansi(warning, Text)
  782    ;   Exited < Entered
  783    ->  Failed is Entered - Exited,
  784        format(string(Text), '+~D-~D', [Exited, Failed]),
  785        Annot = ansi(comment, Text)
  786    ;   format(string(Text), '+~D*~D', [Entered, Exited]),
  787        Annot = ansi(fg(cyan), Text)
  788    ),
  789    string_length(Text, Len).
  790
  791uncovered_clause_line(File, Code, Name-Line) :-
  792    clause_or_set_source_location(Clause, File, Line),
  793    (   Code = [Clause|_]                % included file; omit module
  794    ->  clause_pi(Clause, _:Name)
  795    ;   clause_pi(Code, Name)
  796    ).
 clause_pi(+Clause, -Name) is det
Return the clause predicate indicator as Module:Name/Arity.
  802clause_pi(Clause, Name) :-
  803    clause(Module:Head, _, Clause),
  804    functor(Head,F,A),
  805    Name=Module:F/A.
  806
  807print_clause_line((Module:Name/Arity)-Lines):-
  808    term_string(Module:Name, Complete_name),
  809    summary(Complete_name, 54, SName),
  810    format('~4|~w~t~59|~p~n', [SName/Arity, Lines]).
  811
  812
  813		 /*******************************
  814		 *     LINE LEVEL CALL SITES	*
  815		 *******************************/
  816
  817join_annots(Annots, Joined) :-
  818    sort(2, @=<, Annots, ByPC),
  819    join_annots_(ByPC, Joined0),
  820    sort(1, @=<, Joined0, Joined).
  821
  822join_annots_([], []).
  823join_annots_([H0|T0], [H|T]) :-
  824    sum_annot_counts(H0, H, T0, T1),
  825    join_annots_(T1, T).
  826
  827sum_annot_counts(line_anot(Line, PC, Enter1, Exit1),
  828                 Final,
  829                 [line_anot(Line, PC, Enter2, Exit2)|T0],
  830                 T) :-
  831    !,
  832    Enter is Enter1 + Enter2,
  833    Exit  is Exit1 + Exit2,
  834    sum_annot_counts(line_anot(Line, PC, Enter, Exit),
  835                     Final, T0, T).
  836sum_annot_counts(Sum, Sum, T, T).
 clause_call_site_annotations(+Clause, -Annotations) is det
Arguments:
Annotations- is a list line_anot(Line, PC, Entered, Exited)
  842clause_call_site_annotations(Clause, Annots) :-
  843    findall(Annot,
  844            clause_call_site_annotation(Clause, Annot),
  845            Annots).
  846
  847clause_call_site_annotation(ClauseRef,
  848                            line_anot(Line, NextPC, Entered, Exited)) :-
  849    clause_call_site(ClauseRef, PC-NextPC, Line:_LPos),
  850    (   '$cov_data'(call_site(ClauseRef, NextPC), Entered, Exited)
  851    ->  true
  852    ;   '$fetch_vm'(ClauseRef, PC, _, VMI),
  853        \+ no_annotate_call_site(VMI)
  854    ->  Entered = 0, Exited = 0
  855    ).
  856
  857no_annotate_call_site(i_enter).
  858no_annotate_call_site(i_exit).
  859no_annotate_call_site(i_cut).
  860
  861clause_call_site(ClauseRef, PC-NextPC, Pos) :-
  862    clause_info(ClauseRef, File, TermPos, _NameOffset),
  863    '$break_pc'(ClauseRef, PC, NextPC),
  864    '$clause_term_position'(ClauseRef, NextPC, List),
  865    catch(prolog_breakpoints:range(List, TermPos, SubPos), E, true),
  866    (   var(E)
  867    ->  arg(1, SubPos, A),
  868        file_offset_pos(File, A, Pos)
  869    ;   print_message(warning, coverage(clause_info(ClauseRef))),
  870        fail
  871    ).
  872
  873file_offset_pos(File, A, Line:LPos) :-
  874    file_text(File, String),
  875    State = start(1, 0),
  876    call_nth(sub_string(String, S, _, _, "\n"), NLine),
  877    (   S >= A
  878    ->  !,
  879        State = start(Line, SLine),
  880        LPos is A-SLine
  881    ;   NS is S+1,
  882        NLine1 is NLine+1,
  883        nb_setarg(1, State, NLine1),
  884        nb_setarg(2, State, NS),
  885        fail
  886    ).
  887
  888file_text(File, String) :-
  889    setup_call_cleanup(
  890        open(File, read, In),
  891        read_string(In, _, String),
  892        close(In)).
 check_correct_offsets(+Clauses, +Annotations) is det
Verify that all PC's that were annotated have been generated as possible call sites.
  899check_correct_offsets([Clause|_], [Annots|_]) :-
  900    maplist(arg(2), Annots, PCs),
  901    check_covered_call_sites(Clause, PCs).
  902
  903check_covered_call_sites(Clause, Reported) :-
  904    findall(PC, ('$cov_data'(call_site(Clause,PC), Enter, _), Enter > 0), Seen),
  905    sort(Reported, SReported),
  906    sort(Seen, SSeen),
  907    ord_subtract(SSeen, SReported, Missed),
  908    (   Missed == []
  909    ->  true
  910    ;   print_message(warning, coverage(unreported_call_sites(Clause, Missed)))
  911    ).
  912
  913
  914		 /*******************************
  915		 *           ANNOTATE		*
  916		 *******************************/
  917
  918clean_output(Options) :-
  919    option(dir(Dir), Options),
  920    !,
  921    option(ext(Ext), Options, cov),
  922    format(atom(Pattern), '~w/*.~w', [Dir, Ext]),
  923    expand_file_name(Pattern, Files),
  924    maplist(delete_file, Files).
  925clean_output(Options) :-
  926    forall(source_file(File),
  927           clean_output(File, Options)).
  928
  929clean_output(File, Options) :-
  930    option(ext(Ext), Options, cov),
  931    file_name_extension(File, Ext, CovFile),
  932    (   exists_file(CovFile)
  933    ->  E = error(_,_),
  934        catch(delete_file(CovFile), E,
  935              print_message(warning, E))
  936    ;   true
  937    ).
 annotate_file(+File, +Annotations, +Options) is det
Create an annotated copy of File. Annotations is a list of LineNo-Annotation, where Annotation is atomic or a term Format-Args, optionally embedded in ansi(Code, Annotation).
  946annotate_file(Source, Annotations, Options) :-
  947    option(ext(Ext), Options, cov),
  948    (   option(dir(Dir), Options)
  949    ->  file_base_name(Source, Base),
  950        file_name_extension(Base, Ext, CovFile),
  951        directory_file_path(Dir, CovFile, CovPath),
  952        make_directory_path(Dir)
  953    ;   file_name_extension(Source, Ext, CovPath)
  954    ),
  955    summary(Source, 30, SSource),
  956    progress('Annotating ~w in ~w ... ', [SSource,CovPath]),
  957    keysort(Annotations, SortedAnnotations),
  958    setup_call_cleanup(
  959        open(Source, read, In),
  960        setup_call_cleanup(
  961            open(CovPath, write, Out),
  962            annotate(In, Out, SortedAnnotations, Options),
  963            close(Out)),
  964        close(In)).
  965
  966annotate(In, Out, Annotations, Options) :-
  967    (   option(color(true), Options, true)
  968    ->  set_stream(Out, tty(true))
  969    ;   true
  970    ),
  971    annotate(In, Out, Annotations, 0, Options).
  972
  973annotate(In, Out, Annotations, LineNo0, Options) :-
  974    read_line_to_string(In, Line),
  975    (   Line == end_of_file
  976    ->  true
  977    ;   succ(LineNo0, LineNo),
  978        margins(LMargin, CMargin, Options),
  979        line_no(LineNo, Out, LMargin),
  980        annotations(LineNo, Out, LMargin, Annotations, Annotations1),
  981        format(Out, '~t~*|~s~n', [CMargin, Line]),
  982        annotate(In, Out, Annotations1, LineNo, Options)
  983    ).
  984
  985annotations(Line, Out, LMargin, [Line-Annot|T0], T) :-
  986    !,
  987    write_annotation(Out, Annot),
  988    (   T0 = [Line-_|_]
  989    ->  with_output_to(Out, ansi_format(bold, ' \u2bb0~n~t~*|', [LMargin])),
  990        annotations(Line, Out, LMargin, T0, T)
  991    ;   T = T0
  992    ).
  993annotations(_, _, _, Annots, Annots).
  994
  995write_annotation(Out, ansi(Code, Fmt-Args)) =>
  996    with_output_to(Out, ansi_format(Code, Fmt, Args)).
  997write_annotation(Out, ansi(Code, Fmt)) =>
  998    with_output_to(Out, ansi_format(Code, Fmt, [])).
  999write_annotation(Out, Fmt-Args) =>
 1000    format(Out, Fmt, Args).
 1001write_annotation(Out, Fmt) =>
 1002    format(Out, Fmt, []).
 1003
 1004line_no(_, _, 0) :- !.
 1005line_no(Line, Out, LMargin) :-
 1006    with_output_to(Out, ansi_format(fg(127,127,127), '~t~d ~*|',
 1007                                    [Line, LMargin])).
 1008
 1009margins(LMargin, Margin, Options) :-
 1010    option(line_numbers(true), Options, true),
 1011    !,
 1012    option(line_number_margin(LMargin), Options, 6),
 1013    option(margin(AMargin), Options, 4),
 1014    Margin is LMargin+AMargin.
 1015margins(0, Margin, Options) :-
 1016    option(margin(Margin), Options, 4).
 report_hook(+Succeeded, +Failed) is semidet
This hook is called after the data collection. It is passed a list of objects that have succeeded as well as a list of objects that have failed. The objects are one of
ClauseRef
The specified clause
call_site(ClauseRef, PC)
A call was make in ClauseRef at the given program counter.
 1029:- multifile
 1030    report_hook/2. 1031
 1032		 /*******************************
 1033		 *          SAVE/RELOAD		*
 1034		 *******************************/
 cov_save_data(+File, +Options) is det
Save the coverage information to File. Options:
append(true)
Append to File rather than truncating the data if the file exists.

The File is opened using lock(exclusive), which implies that, provided the OS and file system implements file locking, multiple processes may save coverage data to the same file.

The saved data is highly specific to the setup in which it has been created. It can typically only be reloaded using cov_load_data/2 in the same Prolog executable using the same options and with all relevant source file unmodified at the same location.

Reproducibility can be improved by using `.qlf` files or saved states.

 1056:- thread_local
 1057    saved_clause/2.                     % Clause, Ref
 1058
 1059cov_save_data(File, Options) :-
 1060    (   option(append(true), Options)
 1061    ->  Mode = append
 1062    ;   Mode = write
 1063    ),
 1064    absolute_file_name(File, Path, [ access(write) ]),
 1065    setup_call_cleanup(
 1066        open(Path, Mode, Out,
 1067             [ encoding(utf8),
 1068               lock(exclusive)
 1069             ]),
 1070        cov_save_to_stream(Out),
 1071        ( retractall(saved_clause(_,_)),
 1072          close(Out))).
 1073
 1074cov_save_to_stream(Out) :-
 1075    get_time(Now),
 1076    format(Out, 'cov_begin_data(~1f).~n', [Now]),
 1077    forall('$cov_data'(Site, Enter, Exit),
 1078           cov_save_entry(Out, Site, Enter, Exit)),
 1079    format(Out, 'cov_end_data.~n', []).
 1080
 1081:- det(cov_save_entry/4). 1082cov_save_entry(Out, call_site(Clause, PC), Enter, Exit) =>
 1083    save_clause(Out, Clause, Ref),
 1084    (   nonvar(Ref)
 1085    ->  format(Out, '~q.~n', [cs(Ref, PC, Enter, Exit)])
 1086    ;   true
 1087    ).
 1088cov_save_entry(Out, clause(Clause), Enter, Exit) =>
 1089    save_clause(Out, Clause, Ref),
 1090    (   nonvar(Ref)
 1091    ->  format(Out, '~q.~n', [cs(Ref, Enter, Exit)])
 1092    ;   true
 1093    ).
 1094
 1095save_clause(_Out, Clause, Ref) :-
 1096    saved_clause(Clause, Ref),
 1097    !.
 1098save_clause(Out, Clause, Ref) :-
 1099    clause_property(Clause, file(File)),
 1100    clause_property(Clause, line_count(Line)),
 1101    clause_property(Clause, size(Bytes)),
 1102    clause_property(Clause, predicate(PI)),
 1103    main_source(File, Main),
 1104    source_file_property(Main, load_context(Module, Location, Options)),
 1105    nth_clause(_, Nth, Clause),
 1106    !,
 1107    (   predicate_property(saved_clause(_,_), number_of_clauses(N))
 1108    ->  Ref is N+1
 1109    ;   Ref = 1
 1110    ),
 1111    format(Out, '~q.~n', [cl(PI, Nth, Bytes, Main, File:Line, Module, Location, Options, Ref)]),
 1112    assertz(saved_clause(Clause, Ref)).
 1113save_clause(_Out, Clause, _Ref) :-
 1114    debug(cov(save), 'Could not save clause ~p', [Clause]).
 cov_load_data(+File, +Options) is det
Reload coverage data from File. Options:
load true
If specified and the file in which a clauses is expected to exist, load the file using load_files/2 with the same options as used to initially load the file.
silent(+Boolean)
When true, do not emit messages on not loaded source files.

Data is assumed to be reliable if the Nth-clause of a predicate is loaded from the same file at the same line number and has the same size. Unreliable data is ignored, silently if silent(true) is used.

 1131:- thread_local
 1132    warned/1. 1133
 1134cov_load_data(File, Options) :-
 1135    absolute_file_name(File, Path, [ access(read) ]),
 1136    setup_call_cleanup(
 1137        open(Path, read, In, [encoding(utf8)]),
 1138        cov_load_data_from_stream(In, Options),
 1139        ( retractall(saved_clause(_,_)),
 1140          retractall(warned(_)),
 1141          close(In))).
 1142
 1143cov_load_data_from_stream(In, Options) :-
 1144    read_term(In, Term, []),
 1145    cov_load_data_from_stream(Term, In, Options).
 1146
 1147cov_load_data_from_stream(end_of_file, _, _) :-
 1148    !.
 1149cov_load_data_from_stream(Term, In, Options) :-
 1150    cov_restore_data(Term, Options),
 1151    read_term(In, Term2, []),
 1152    cov_load_data_from_stream(Term2, In, Options).
 1153
 1154cov_restore_data(cov_begin_data(_), _Options) =>
 1155    true.
 1156cov_restore_data(cl(PI, Nth,
 1157                    Bytes, Main, File:Line, Module, _Location, LoadOptions,
 1158                    Ref), Options) =>
 1159    (   restore_clause(PI, Nth, Bytes, File, Line, Ref)
 1160    ->  true
 1161    ;   source_file(File)
 1162    ->  warn(File, coverage(source_changed(File, PI)))
 1163    ;   option(load(true), Options)
 1164    ->  load_files(Module:Main, [if(not_loaded)|LoadOptions]),
 1165        (   restore_clause(PI, Nth, Bytes, File, Line, Ref)
 1166        ->  true
 1167        ;   warn(File, coverage(source_changed(File, PI)))
 1168        )
 1169    ;   option(silent(true), Options)
 1170    ->  true
 1171    ;   warn(File, coverage(no_source(File)))
 1172    ).
 1173cov_restore_data(cs(Ref, PC, Enter, Exit), _Options) =>
 1174    (   saved_clause(Clause, Ref)
 1175    ->  '$cov_add'(call_site(Clause, PC), Enter, Exit)
 1176    ;   true
 1177    ).
 1178cov_restore_data(cs(Ref, Enter, Exit), _Options) =>
 1179    (   saved_clause(Clause, Ref)
 1180    ->  '$cov_add'(clause(Clause), Enter, Exit)
 1181    ;   true
 1182    ).
 1183cov_restore_data(cov_end_data, _Options) =>
 1184    retractall(saved_clause(_,_)).
 1185
 1186restore_clause(PI, _Nth, Bytes, File, Line, Ref) :-
 1187    pi_head(PI, Head),
 1188    predicate_property(Head, multifile),
 1189    !,
 1190    (   nth_clause(Head, _, Clause),
 1191        clause_property(Clause, file(File)),
 1192        clause_property(Clause, line_count(Line)),
 1193        clause_property(Clause, size(Bytes))
 1194    ->  assertz(saved_clause(Clause, Ref))
 1195    ;   warn(File, coverage(no_multifile_source(File:Line, PI)))
 1196    ).
 1197restore_clause(PI, Nth, Bytes, File, Line, Ref) :-
 1198    pi_head(PI, Head),
 1199    (   nth_clause(Head, Nth, Clause)
 1200    ->  (   clause_property(Clause, file(File)),
 1201            clause_property(Clause, line_count(Line)),
 1202            clause_property(Clause, size(Bytes))
 1203        ->  assertz(saved_clause(Clause, Ref))
 1204        ;   warn(File, coverage(source_changed(File:Line, PI, Nth)))
 1205        )
 1206    ).
 1207
 1208warn(Term, _Msg) :-
 1209    warned(Term),
 1210    !.
 1211warn(Term, Msg) :-
 1212    assertz(warned(Term)),
 1213    print_message(warning, Msg).
 cov_reset is det
Discard all collected coverage data. This predicate raises a permission error if coverage collection is in progress.
 1221cov_reset :-
 1222    '$cov_reset'.
 cov_property(?Property)
True when coverage analysis satisfies Property. Currently defined properties are:
active(?Nesting)
True when coverage data is being collected. Nesting expresses the nesting of coverage/1 calls and is normally 1 (one).
 1234cov_property(active(Level)) :-
 1235    '$cov_active'(Level).
 1236
 1237
 1238		 /*******************************
 1239		 *             MESSAGES		*
 1240		 *******************************/
 1241
 1242:- multifile
 1243    prolog:message//1. 1244
 1245prolog:message(coverage(Msg)) -->
 1246    message(Msg).
 1247
 1248message(no_files_to_report) -->
 1249    [ 'No coverage events in selected files'-[] ].
 1250message(clause_info(ClauseRef)) -->
 1251    [ 'Inconsistent clause info for '-[] ],
 1252    clause_msg(ClauseRef).
 1253message(unreported_call_sites(ClauseRef, PCList)) -->
 1254    [ 'Failed to report call sites for '-[] ],
 1255    clause_msg(ClauseRef),
 1256    [ nl, '  Missed at these PC offsets: ~p'-[PCList] ].
 1257message(source_changed(File, PI)) -->
 1258    [ 'Predicate ', ansi(code, '~p', [PI]), ' cannot be found while file ',
 1259      url(File), ' is loaded.'
 1260    ].
 1261message(no_source(File)) -->
 1262    [ 'File ', url(File), ' is not loaded.  Please re-run with ', nl,
 1263      'file loaded or use the ', ansi(code, 'load(true)', []), ' option.'
 1264    ].
 1265message(no_multifile_source(Location, PI)) -->
 1266    [ 'Could not find matching clause for multifile predicate ',
 1267      ansi(code, '~p', [PI]), ' at ', url(Location)
 1268    ].
 1269message(source_changed(File:Line, PI, Nth)) -->
 1270    [ '~D-th clause for '-[Nth], ansi(code, '~p', [PI]),
 1271      ' cannot be found at ', url(File:Line), '.'
 1272    ].
 1273message(deprecated(show_coverage/2)) -->
 1274    [ 'show_coverage/2 is deprecated.  Please use coverage/2', nl,
 1275      'with the same arguments.'
 1276    ].
 1277
 1278
 1279clause_msg(ClauseRef) -->
 1280    { clause_pi(ClauseRef, PI),
 1281      clause_property(ClauseRef, file(File)),
 1282      clause_property(ClauseRef, line_count(Line))
 1283    },
 1284    [ '~p at'-[PI], nl, '  ', url(File:Line) ].
 1285
 1286
 1287		 /*******************************
 1288		 *      TTY PRINT SUPPORT	*
 1289		 *******************************/
 1290
 1291progress(_, _) :-
 1292    current_prolog_flag(verbose, silent),
 1293    !.
 1294progress(Format, Args) :-
 1295    stream_property(user_output, tty(true)),
 1296    !,
 1297    format(user_output, '\r\e[2K', []),
 1298    ansi_format(comment, Format, Args),
 1299    flush_output(user_output).
 1300progress(Format, Args) :-
 1301    format(Format, Args),
 1302    nl.
 1303
 1304progress_done(_,_) :-
 1305    current_prolog_flag(verbose, silent),
 1306    !.
 1307progress_done(Format, Args) :-
 1308    stream_property(user_output, tty(true)),
 1309    !,
 1310    ansi_format(comment, Format, Args),
 1311    nl.
 1312progress_done(_, _).
 1313
 1314header(Title, Width) :-
 1315    hr(Width),
 1316    ansi_format([bold], '~t~w~t~*|', [Title,Width]),
 1317    nl.
 1318
 1319hr(Width) :-
 1320    format('~N~`\u2015t~*|~n', [Width]).
 tty_width(-Width, +Options) is det
 1324tty_width(W, Options) :-
 1325    option(width(W), Options),
 1326    !.
 1327:- if(current_predicate(tty_size/2)). 1328tty_width(W, _Options) :-
 1329    catch(tty_size(_, TtyW), _, fail),
 1330    !,
 1331    W is max(60, TtyW).
 1332:- endif. 1333tty_width(78, _)