View source with raw comments or as raw
    1/*  Part of SWI-Prolog
    2
    3    Author:        Jan Wielemaker
    4    E-mail:        J.Wielemaker@vu.nl
    5    WWW:           http://www.swi-prolog.org
    6    Copyright (c)  2000-2020, University of Amsterdam
    7                              VU University Amsterdam
    8                              CWI, Amsterdam
    9    All rights reserved.
   10
   11    Redistribution and use in source and binary forms, with or without
   12    modification, are permitted provided that the following conditions
   13    are met:
   14
   15    1. Redistributions of source code must retain the above copyright
   16       notice, this list of conditions and the following disclaimer.
   17
   18    2. Redistributions in binary form must reproduce the above copyright
   19       notice, this list of conditions and the following disclaimer in
   20       the documentation and/or other materials provided with the
   21       distribution.
   22
   23    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
   24    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
   25    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
   26    FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
   27    COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
   28    INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
   29    BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
   30    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
   31    CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
   32    LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
   33    ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
   34    POSSIBILITY OF SUCH DAMAGE.
   35*/
   36
   37:- module(sgml,
   38          [ load_html/3,                % +Input, -DOM, +Options
   39            load_xml/3,                 % +Input, -DOM, +Options
   40            load_sgml/3,                % +Input, -DOM, +Options
   41
   42            load_sgml_file/2,           % +File, -ListOfContent
   43            load_xml_file/2,            % +File, -ListOfContent
   44            load_html_file/2,           % +File, -Document
   45
   46            load_structure/3,           % +File, -Term, +Options
   47
   48            load_dtd/2,                 % +DTD, +File
   49            load_dtd/3,                 % +DTD, +File, +Options
   50            dtd/2,                      % +Type, -DTD
   51            dtd_property/2,             % +DTD, ?Property
   52
   53            new_dtd/2,                  % +Doctype, -DTD
   54            free_dtd/1,                 % +DTD
   55            open_dtd/3,                 % +DTD, +Options, -Stream
   56
   57            new_sgml_parser/2,          % -Parser, +Options
   58            free_sgml_parser/1,         % +Parser
   59            set_sgml_parser/2,          % +Parser, +Options
   60            get_sgml_parser/2,          % +Parser, +Options
   61            sgml_parse/2,               % +Parser, +Options
   62
   63            sgml_register_catalog_file/2, % +File, +StartOrEnd
   64
   65            xml_quote_attribute/3,      % +In, -Quoted, +Encoding
   66            xml_quote_cdata/3,          % +In, -Quoted, +Encoding
   67            xml_quote_attribute/2,      % +In, -Quoted
   68            xml_quote_cdata/2,          % +In, -Quoted
   69            xml_name/1,                 % +In
   70            xml_name/2,                 % +In, +Encoding
   71
   72            xsd_number_string/2,        % ?Number, ?String
   73            xsd_time_string/3,          % ?Term, ?Type, ?String
   74
   75            xml_basechar/1,             % +Code
   76            xml_ideographic/1,          % +Code
   77            xml_combining_char/1,       % +Code
   78            xml_digit/1,                % +Code
   79            xml_extender/1,             % +Code
   80
   81            iri_xml_namespace/2,        % +IRI, -Namespace
   82            iri_xml_namespace/3,        % +IRI, -Namespace, -LocalName
   83            xml_is_dom/1                % +Term
   84          ]).   85:- autoload(library(error),[instantiation_error/1]).   86:- autoload(library(iostream),[open_any/5,close_any/1]).   87:- autoload(library(lists),[member/2,selectchk/3]).   88:- autoload(library(option),[select_option/3,merge_options/3]).   89
   90:- meta_predicate
   91    load_structure(+, -, :),
   92    load_html(+, -, :),
   93    load_xml(+, -, :),
   94    load_sgml(+, -, :).   95
   96:- predicate_options(load_structure/3, 3,
   97                     [ charpos(integer),
   98                       cdata(oneof([atom,string])),
   99                       defaults(boolean),
  100                       dialect(oneof([html,html4,html5,sgml,xhtml,xhtml5,xml,xmlns])),
  101                       doctype(atom),
  102                       dtd(any),
  103                       encoding(oneof(['iso-8859-1', 'utf-8', 'us-ascii'])),
  104                       entity(atom,atom),
  105                       keep_prefix(boolean),
  106                       file(atom),
  107                       line(integer),
  108                       offset(integer),
  109                       number(oneof([token,integer])),
  110                       qualify_attributes(boolean),
  111                       shorttag(boolean),
  112                       case_sensitive_attributes(boolean),
  113                       case_preserving_attributes(boolean),
  114                       system_entities(boolean),
  115                       max_memory(integer),
  116                       ignore_doctype(boolean),
  117                       space(oneof([sgml,preserve,default,remove,strict])),
  118                       xmlns(atom),
  119                       xmlns(atom,atom),
  120                       pass_to(sgml_parse/2, 2)
  121                     ]).  122:- predicate_options(load_html/3, 3,
  123                     [ pass_to(load_structure/3, 3)
  124                     ]).  125:- predicate_options(load_xml/3, 3,
  126                     [ pass_to(load_structure/3, 3)
  127                     ]).  128:- predicate_options(load_sgml/3, 3,
  129                     [ pass_to(load_structure/3, 3)
  130                     ]).  131:- predicate_options(load_dtd/3, 3,
  132                     [ dialect(oneof([sgml,xml,xmlns])),
  133                       pass_to(open/4, 4)
  134                     ]).  135:- predicate_options(sgml_parse/2, 2,
  136                     [ call(oneof([begin,end,cdata,pi,decl,error,xmlns,urlns]),
  137                            callable),
  138                       cdata(oneof([atom,string])),
  139                       content_length(integer),
  140                       document(-any),
  141                       max_errors(integer),
  142                       parse(oneof([file,element,content,declaration,input])),
  143                       source(any),
  144                       syntax_errors(oneof([quiet,print,style])),
  145                       xml_no_ns(oneof([error,quiet]))
  146                     ]).  147:- predicate_options(new_sgml_parser/2, 2,
  148                     [ dtd(any)
  149                     ]).

SGML, XML and HTML parser

This library allows you to parse SGML, XML and HTML data into a Prolog data structure. The library defines several families of predicates:

High-level predicates
Most users will only use load_html/3, load_xml/3 or load_sgml/3 to parse arbitrary input into a DOM structure. These predicates all call load_structure/3, which provides more options and may be used for processing non-standard documents.

The DOM structure can be used by library(xpath) to extract information from the document.

The low-level parser
The actual parser is written in C and consists of two parts: one for processing DTD (Document Type Definitions) and one for parsing data. The data can either be parsed to a Prolog (DOM) term or the parser can perform callbacks for the DOM events.
Utility predicates
Finally, this library provides prmitives for classifying characters and strings according to the XML specification such as xml_name/1 to verify whether an atom is a valid XML name (identifier). It also provides primitives to quote attributes and CDATA elements. */
  179:- multifile user:file_search_path/2.  180:- dynamic   user:file_search_path/2.  181
  182user:file_search_path(dtd, library('DTD')).
  183
  184sgml_register_catalog_file(File, Location) :-
  185    prolog_to_os_filename(File, OsFile),
  186    '_sgml_register_catalog_file'(OsFile, Location).
  187
  188:- use_foreign_library(foreign(sgml2pl)).  189
  190register_catalog(Base) :-
  191    absolute_file_name(dtd(Base),
  192                           [ extensions([soc]),
  193                             access(read),
  194                             file_errors(fail)
  195                           ],
  196                           SocFile),
  197    sgml_register_catalog_file(SocFile, end).
  198
  199:- initialization
  200    ignore(register_catalog('HTML4')).  201
  202
  203                 /*******************************
  204                 *         DTD HANDLING         *
  205                 *******************************/
  206
  207/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  208Note that concurrent access to DTD objects  is not allowed, and hence we
  209will allocate and destroy them in each   thread.  Possibibly it would be
  210nicer to find out why  concurrent  access   to  DTD's  is  flawed. It is
  211diagnosed to mess with the entity resolution by Fabien Todescato.
  212- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
  213
  214:- thread_local
  215    current_dtd/2.  216:- volatile
  217    current_dtd/2.  218:- thread_local
  219    registered_cleanup/0.  220:- volatile
  221    registered_cleanup/0.  222
  223:- multifile
  224    dtd_alias/2.  225
  226:- create_prolog_flag(html_dialect, html5, [type(atom)]).  227
  228dtd_alias(html4, 'HTML4').
  229dtd_alias(html5, 'HTML5').
  230dtd_alias(html,  DTD) :-
  231    current_prolog_flag(html_dialect, Dialect),
  232    dtd_alias(Dialect, DTD).
 dtd(+Type, -DTD) is det
DTD is a DTD object created from the file dtd(Type). Loaded DTD objects are cached. Note that DTD objects may not be shared between threads. Therefore, dtd/2 maintains the pool of DTD objects using a thread_local predicate. DTD objects are destroyed if a thread terminates.
Errors
- existence_error(source_sink, dtd(Type))
  244dtd(Type, DTD) :-
  245    current_dtd(Type, DTD),
  246    !.
  247dtd(Type, DTD) :-
  248    new_dtd(Type, DTD),
  249    (   dtd_alias(Type, Base)
  250    ->  true
  251    ;   Base = Type
  252    ),
  253    absolute_file_name(dtd(Base),
  254                       [ extensions([dtd]),
  255                         access(read)
  256                       ], DtdFile),
  257    load_dtd(DTD, DtdFile),
  258    register_cleanup,
  259    asserta(current_dtd(Type, DTD)).
 load_dtd(+DTD, +DtdFile, +Options)
Load DtdFile into a DTD. Defined options are:
dialect(+Dialect)
Dialect to use (xml, xmlns, sgml)
encoding(+Encoding)
Encoding of DTD file
Arguments:
DTD- is a fresh DTD object, normally created using new_dtd/1.
  274load_dtd(DTD, DtdFile) :-
  275    load_dtd(DTD, DtdFile, []).
  276load_dtd(DTD, DtdFile, Options) :-
  277    sgml_open_options(sgml:Options, OpenOptions, sgml:DTDOptions),
  278    setup_call_cleanup(
  279        open_dtd(DTD, DTDOptions, DtdOut),
  280        setup_call_cleanup(
  281            open(DtdFile, read, DtdIn, OpenOptions),
  282            copy_stream_data(DtdIn, DtdOut),
  283            close(DtdIn)),
  284        close(DtdOut)).
 destroy_dtds
Destroy DTDs cached by this thread as they will become unreachable anyway.
  291destroy_dtds :-
  292    (   current_dtd(_Type, DTD),
  293        free_dtd(DTD),
  294        fail
  295    ;   true
  296    ).
 register_cleanup
Register cleanup of DTDs created for this thread.
  302register_cleanup :-
  303    registered_cleanup,
  304    !.
  305register_cleanup :-
  306    (   thread_self(main)
  307    ->  at_halt(destroy_dtds)
  308    ;   current_prolog_flag(threads, true)
  309    ->  prolog_listen(this_thread_exit, destroy_dtds)
  310    ;   true
  311    ),
  312    assert(registered_cleanup).
  313
  314
  315                 /*******************************
  316                 *          EXAMINE DTD         *
  317                 *******************************/
  318
  319prop(doctype(_), _).
  320prop(elements(_), _).
  321prop(entities(_), _).
  322prop(notations(_), _).
  323prop(entity(E, _), DTD) :-
  324    (   nonvar(E)
  325    ->  true
  326    ;   '$dtd_property'(DTD, entities(EL)),
  327        member(E, EL)
  328    ).
  329prop(element(E, _, _), DTD) :-
  330    (   nonvar(E)
  331    ->  true
  332    ;   '$dtd_property'(DTD, elements(EL)),
  333        member(E, EL)
  334    ).
  335prop(attributes(E, _), DTD) :-
  336    (   nonvar(E)
  337    ->  true
  338    ;   '$dtd_property'(DTD, elements(EL)),
  339        member(E, EL)
  340    ).
  341prop(attribute(E, A, _, _), DTD) :-
  342    (   nonvar(E)
  343    ->  true
  344    ;   '$dtd_property'(DTD, elements(EL)),
  345        member(E, EL)
  346    ),
  347    (   nonvar(A)
  348    ->  true
  349    ;   '$dtd_property'(DTD, attributes(E, AL)),
  350        member(A, AL)
  351    ).
  352prop(notation(N, _), DTD) :-
  353    (   nonvar(N)
  354    ->  true
  355    ;   '$dtd_property'(DTD, notations(NL)),
  356        member(N, NL)
  357    ).
  358
  359dtd_property(DTD, Prop) :-
  360    prop(Prop, DTD),
  361    '$dtd_property'(DTD, Prop).
  362
  363
  364                 /*******************************
  365                 *             SGML             *
  366                 *******************************/
 load_structure(+Source, -ListOfContent, :Options) is det
Parse Source and return the resulting structure in ListOfContent. Source is handed to open_any/5, which allows for processing an extensible set of input sources.

A proper XML document contains only a single toplevel element whose name matches the document type. Nevertheless, a list is returned for consistency with the representation of element content.

The encoding(+Encoding) option is treated special for compatibility reasons:

  390load_structure(Spec, DOM, Options) :-
  391    sgml_open_options(Options, OpenOptions, SGMLOptions),
  392    setup_call_cleanup(
  393        open_any(Spec, read, In, Close, OpenOptions),
  394        load_structure_from_stream(In, DOM, SGMLOptions),
  395        close_any(Close)).
  396
  397sgml_open_options(Options, OpenOptions, SGMLOptions) :-
  398    Options = M:Plain,
  399    (   select_option(encoding(Encoding), Plain, NoEnc)
  400    ->  (   sgml_encoding(Encoding)
  401        ->  merge_options(NoEnc, [type(binary)], OpenOptions),
  402            SGMLOptions = Options
  403        ;   OpenOptions = Plain,
  404            SGMLOptions = M:NoEnc
  405        )
  406    ;   merge_options(Plain, [type(binary)], OpenOptions),
  407        SGMLOptions = Options
  408    ).
  409
  410sgml_encoding(Enc) :-
  411    downcase_atom(Enc, Enc1),
  412    sgml_encoding_l(Enc1).
  413
  414sgml_encoding_l('iso-8859-1').
  415sgml_encoding_l('us-ascii').
  416sgml_encoding_l('utf-8').
  417sgml_encoding_l('utf8').
  418sgml_encoding_l('iso_latin_1').
  419sgml_encoding_l('ascii').
  420
  421load_structure_from_stream(In, Term, M:Options) :-
  422    (   select_option(dtd(DTD), Options, Options1)
  423    ->  ExplicitDTD = true
  424    ;   ExplicitDTD = false,
  425        Options1 = Options
  426    ),
  427    move_front(Options1, dialect(_), Options2), % dialect sets defaults
  428    setup_call_cleanup(
  429        new_sgml_parser(Parser,
  430                        [ dtd(DTD)
  431                        ]),
  432        parse(Parser, M:Options2, TermRead, In),
  433        free_sgml_parser(Parser)),
  434    (   ExplicitDTD == true
  435    ->  (   DTD = dtd(_, DocType),
  436            dtd_property(DTD, doctype(DocType))
  437        ->  true
  438        ;   true
  439        )
  440    ;   free_dtd(DTD)
  441    ),
  442    Term = TermRead.
  443
  444move_front(Options0, Opt, Options) :-
  445    selectchk(Opt, Options0, Options1),
  446    !,
  447    Options = [Opt|Options1].
  448move_front(Options, _, Options).
  449
  450
  451parse(Parser, M:Options, Document, In) :-
  452    set_parser_options(Options, Parser, In, Options1),
  453    parser_meta_options(Options1, M, Options2),
  454    set_input_location(Parser, In),
  455    sgml_parse(Parser,
  456               [ document(Document),
  457                 source(In)
  458               | Options2
  459               ]).
  460
  461set_parser_options([], _, _, []).
  462set_parser_options([H|T], Parser, In, Rest) :-
  463    (   set_parser_option(H, Parser, In)
  464    ->  set_parser_options(T, Parser, In, Rest)
  465    ;   Rest = [H|R2],
  466        set_parser_options(T, Parser, In, R2)
  467    ).
  468
  469set_parser_option(Var, _Parser, _In) :-
  470    var(Var),
  471    !,
  472    instantiation_error(Var).
  473set_parser_option(Option, Parser, _) :-
  474    def_entity(Option, Parser),
  475    !.
  476set_parser_option(offset(Offset), _Parser, In) :-
  477    !,
  478    seek(In, Offset, bof, _).
  479set_parser_option(Option, Parser, _In) :-
  480    parser_option(Option),
  481    !,
  482    set_sgml_parser(Parser, Option).
  483set_parser_option(Name=Value, Parser, In) :-
  484    Option =.. [Name,Value],
  485    set_parser_option(Option, Parser, In).
  486
  487
  488parser_option(dialect(_)).
  489parser_option(shorttag(_)).
  490parser_option(case_sensitive_attributes(_)).
  491parser_option(case_preserving_attributes(_)).
  492parser_option(system_entities(_)).
  493parser_option(max_memory(_)).
  494parser_option(ignore_doctype(_)).
  495parser_option(file(_)).
  496parser_option(line(_)).
  497parser_option(space(_)).
  498parser_option(number(_)).
  499parser_option(defaults(_)).
  500parser_option(doctype(_)).
  501parser_option(qualify_attributes(_)).
  502parser_option(encoding(_)).
  503parser_option(keep_prefix(_)).
  504
  505
  506def_entity(entity(Name, Value), Parser) :-
  507    get_sgml_parser(Parser, dtd(DTD)),
  508    xml_quote_attribute(Value, QValue),
  509    setup_call_cleanup(open_dtd(DTD, [], Stream),
  510                       format(Stream, '<!ENTITY ~w "~w">~n',
  511                              [Name, QValue]),
  512                       close(Stream)).
  513def_entity(xmlns(URI), Parser) :-
  514    set_sgml_parser(Parser, xmlns(URI)).
  515def_entity(xmlns(NS, URI), Parser) :-
  516    set_sgml_parser(Parser, xmlns(NS, URI)).
 parser_meta_options(+Options0, +Module, -Options)
Qualify meta-calling options to the parser.
  522parser_meta_options([], _, []).
  523parser_meta_options([call(When, Closure)|T0], M, [call(When, M:Closure)|T]) :-
  524    !,
  525    parser_meta_options(T0, M, T).
  526parser_meta_options([H|T0], M, [H|T]) :-
  527    parser_meta_options(T0, M, T).
 set_input_location(+Parser, +In:stream) is det
Set the input location if this was not set explicitly
  534set_input_location(Parser, _In) :-
  535    get_sgml_parser(Parser, file(_)),
  536    !.
  537set_input_location(Parser, In) :-
  538    stream_property(In, file_name(File)),
  539    !,
  540    set_sgml_parser(Parser, file(File)),
  541    stream_property(In, position(Pos)),
  542    set_sgml_parser(Parser, position(Pos)).
  543set_input_location(_, _).
  544
  545                 /*******************************
  546                 *           UTILITIES          *
  547                 *******************************/
 load_sgml_file(+File, -DOM) is det
Load SGML from File and unify the resulting DOM structure with DOM.
deprecated
- New code should use load_sgml/3.
  556load_sgml_file(File, Term) :-
  557    load_sgml(File, Term, []).
 load_xml_file(+File, -DOM) is det
Load XML from File and unify the resulting DOM structure with DOM.
deprecated
- New code should use load_xml/3.
  566load_xml_file(File, Term) :-
  567    load_xml(File, Term, []).
 load_html_file(+File, -DOM) is det
Load HTML from File and unify the resulting DOM structure with DOM.
deprecated
- New code should use load_html/3.
  576load_html_file(File, DOM) :-
  577    load_html(File, DOM, []).
 load_html(+Input, -DOM, +Options) is det
Load HTML text from Input and unify the resulting DOM structure with DOM. Options are passed to load_structure/3, after adding the following default options:
dtd(DTD)
Pass the DTD for HTML as obtained using dtd(html, DTD).
dialect(Dialect)
Current dialect from the Prolog flag html_dialect
max_errors(-1)
syntax_errors(quiet)
Most HTML encountered in the wild contains errors. Even in the context of errors, the resulting DOM term is often a reasonable guess at the intent of the author.

You may also want to use the library(http/http_open) to support loading from HTTP and HTTPS URLs. For example:

:- use_module(library(http/http_open)).
:- use_module(library(sgml)).

load_html_url(URL, DOM) :-
    load_html(URL, DOM, []).
  606load_html(File, Term, M:Options) :-
  607    current_prolog_flag(html_dialect, Dialect),
  608    dtd(Dialect, DTD),
  609    merge_options(Options,
  610                  [ dtd(DTD),
  611                    dialect(Dialect),
  612                    max_errors(-1),
  613                    syntax_errors(quiet)
  614                  ], Options1),
  615    load_structure(File, Term, M:Options1).
 load_xml(+Input, -DOM, +Options) is det
Load XML text from Input and unify the resulting DOM structure with DOM. Options are passed to load_structure/3, after adding the following default options:
  625load_xml(Input, DOM, M:Options) :-
  626    merge_options(Options,
  627                  [ dialect(xml)
  628                  ], Options1),
  629    load_structure(Input, DOM, M:Options1).
 load_sgml(+Input, -DOM, +Options) is det
Load SGML text from Input and unify the resulting DOM structure with DOM. Options are passed to load_structure/3, after adding the following default options:
  639load_sgml(Input, DOM, M:Options) :-
  640    merge_options(Options,
  641                  [ dialect(sgml)
  642                  ], Options1),
  643    load_structure(Input, DOM, M:Options1).
  644
  645
  646
  647                 /*******************************
  648                 *            ENCODING          *
  649                 *******************************/
 xml_quote_attribute(+In, -Quoted) is det
 xml_quote_cdata(+In, -Quoted) is det
Backward compatibility for versions that allow to specify encoding. All characters that cannot fit the encoding are mapped to XML character entities (&#dd;). Using ASCII is the safest value.
  659xml_quote_attribute(In, Quoted) :-
  660    xml_quote_attribute(In, Quoted, ascii).
  661
  662xml_quote_cdata(In, Quoted) :-
  663    xml_quote_cdata(In, Quoted, ascii).
 xml_name(+Atom) is semidet
True if Atom is a valid XML name.
  669xml_name(In) :-
  670    xml_name(In, ascii).
  671
  672
  673                 /*******************************
  674                 *    XML CHARACTER CLASSES     *
  675                 *******************************/
 xml_basechar(+CodeOrChar) is semidet
 xml_ideographic(+CodeOrChar) is semidet
 xml_combining_char(+CodeOrChar) is semidet
 xml_digit(+CodeOrChar) is semidet
 xml_extender(+CodeOrChar) is semidet
XML character classification predicates. Each of these predicates accept both a character (one-character atom) and a code (integer).
See also
- http://www.w3.org/TR/2006/REC-xml-20060816
  690                 /*******************************
  691                 *         TYPE CHECKING        *
  692                 *******************************/
 xml_is_dom(@Term) is semidet
True if term statisfies the structure as returned by load_structure/3 and friends.
  699xml_is_dom(0) :- !, fail.               % catch variables
  700xml_is_dom(List) :-
  701    is_list(List),
  702    !,
  703    xml_is_content_list(List).
  704xml_is_dom(Term) :-
  705    xml_is_element(Term).
  706
  707xml_is_content_list([]).
  708xml_is_content_list([H|T]) :-
  709    xml_is_content(H),
  710    xml_is_content_list(T).
  711
  712xml_is_content(0) :- !, fail.
  713xml_is_content(pi(Pi)) :-
  714    !,
  715    atom(Pi).
  716xml_is_content(CDATA) :-
  717    atom(CDATA),
  718    !.
  719xml_is_content(CDATA) :-
  720    string(CDATA),
  721    !.
  722xml_is_content(Term) :-
  723    xml_is_element(Term).
  724
  725xml_is_element(element(Name, Attributes, Content)) :-
  726    dom_name(Name),
  727    dom_attributes(Attributes),
  728    xml_is_content_list(Content).
  729
  730dom_name(NS:Local) :-
  731    atom(NS),
  732    atom(Local),
  733    !.
  734dom_name(Local) :-
  735    atom(Local).
  736
  737dom_attributes(0) :- !, fail.
  738dom_attributes([]).
  739dom_attributes([H|T]) :-
  740    dom_attribute(H),
  741    dom_attributes(T).
  742
  743dom_attribute(Name=Value) :-
  744    dom_name(Name),
  745    atomic(Value).
  746
  747
  748                 /*******************************
  749                 *            MESSAGES          *
  750                 *******************************/
  751:- multifile
  752    prolog:message/3.  753
  754%       Catch messages.  sgml/4 is generated by the SGML2PL binding.
  755
  756prolog:message(sgml(Parser, File, Line, Message)) -->
  757    { get_sgml_parser(Parser, dialect(Dialect))
  758    },
  759    [ 'SGML2PL(~w): ~w:~w: ~w'-[Dialect, File, Line, Message] ].
  760
  761
  762                 /*******************************
  763                 *         XREF SUPPORT         *
  764                 *******************************/
  765
  766:- multifile
  767    prolog:called_by/2.  768
  769prolog:called_by(sgml_parse(_, Options), Called) :-
  770    findall(Meta, meta_call_term(_, Meta, Options), Called).
  771
  772meta_call_term(T, G+N, Options) :-
  773    T = call(Event, G),
  774    pmember(T, Options),
  775    call_params(Event, Term),
  776    functor(Term, _, N).
  777
  778pmember(X, List) :-                     % member for partial lists
  779    nonvar(List),
  780    List = [H|T],
  781    (   X = H
  782    ;   pmember(X, T)
  783    ).
  784
  785call_params(begin, begin(tag,attributes,parser)).
  786call_params(end,   end(tag,parser)).
  787call_params(cdata, cdata(cdata,parser)).
  788call_params(pi,    pi(cdata,parser)).
  789call_params(decl,  decl(cdata,parser)).
  790call_params(error, error(severity,message,parser)).
  791call_params(xmlns, xmlns(namespace,url,parser)).
  792call_params(urlns, urlns(url,url,parser)).
  793
  794                 /*******************************
  795                 *           SANDBOX            *
  796                 *******************************/
  797
  798:- multifile
  799    sandbox:safe_primitive/1,
  800    sandbox:safe_meta_predicate/1.  801
  802sandbox:safe_meta_predicate(sgml:load_structure/3).
  803sandbox:safe_primitive(sgml:dtd(Dialect, _)) :-
  804    dtd_alias(Dialect, _).
  805sandbox:safe_primitive(sgml:xml_quote_attribute(_,_,_)).
  806sandbox:safe_primitive(sgml:xml_quote_cdata(_,_,_)).
  807sandbox:safe_primitive(sgml:xml_name(_,_)).
  808sandbox:safe_primitive(sgml:xml_basechar(_)).
  809sandbox:safe_primitive(sgml:xml_ideographic(_)).
  810sandbox:safe_primitive(sgml:xml_combining_char(_)).
  811sandbox:safe_primitive(sgml:xml_digit(_)).
  812sandbox:safe_primitive(sgml:xml_extender(_)).
  813sandbox:safe_primitive(sgml:iri_xml_namespace(_,_,_)).
  814sandbox:safe_primitive(sgml:xsd_number_string(_,_)).
  815sandbox:safe_primitive(sgml:xsd_time_string(_,_,_))